FT-300B Wire and cable resistivity tester

一.描述Description：

四端測量法適用于電線電纜、漆包線、銅線、合金線、鋁線等導體線束線材測量適用于生產企業、高等院校、科研部門，實驗室；對產品質量分析電阻、電阻率、電導率參數.液晶顯示，自動分析，自動讀數，具有溫度補償 ，單位切換，自動量程，選配：PC軟件數據，報表處理可選擇中文或英文操作界面

four-terminal measurement method is suitable for the conductor wire wire measurement.Such as  wire and cable. enameled wire. copper wire. alloy wire. Aluminum  wire etc.. Suitable for the production enterprises. colleges and universities. scientific research department and laboratory. Analysis resistance, resistivity, electrical conductivity parameters of product quality analysis. Liquid crystal display. automatic analysis. automatic reading. with temperature *pensation.the unit switch. automatic range. Optional: PC software data. report processing operation interface can choose Chinese or English

二：標準Standard：

依據標準 GB3048.2-2007、GB/T3048.4-2007、GB/T3952-2008、GB/T3953-2009、GB/T3954-2008、GB/T3955-2009、GB/T3956-2008等

: according to standards of  GB3048.2-2007、GB/T3048.4-2007、GB/T3952-2008、GB/T3953-2009、GB/T3954-2008、GB/T3955-2009、GB/T3956-2008 etc

三.技術參數資料

電阻測量范圍/ Resistance measuring range：
1、電阻率/ resistivity： 10-8～2×106Ω-cm
電阻/ resistance： 10-7～2×106Ω

電導率/ conductivity：5 ×10-6～108s/cm

分辨率/ resolution： 最小/ Minimum 0.1μΩ  
測量誤差±（0.05%讀數±5字）/Accuracy ±0.05%
2、測量電壓量程/ Measuring voltage range：2mV  20mV 200mV 2V
測量精度±（0.1%讀數）/ measuring accuracy±0.1%

分辨率/ resolution：  0.1uV  1uV  10uV  100uV
3、⑴電流輸出:直流電流0～1000mA連續可調，由交流電源供電.

Current output：DC current 0～1000mA continuously adjustable. AC power supply.
   ⑵量程/ range：1μA，10μA，100µA，1mA，10mA，1000mA.
   ⑶誤差：±0.2%讀數±2字/ accuracy ±0.2%

4. 主機外形尺寸/ Overall dimensions：330mm*340mm*120mm

6、顯示方式：液晶顯示/ Display: LCD

7、電源/ Power Supply：220±10% 50HZ—60HZ 功率消耗/ Power consumption < 60W

8、配置：LX-9853通用型導體電阻夾具適用范圍：該夾具與導體電阻率試儀或雙臂直流電橋配套使用，用于檢測導體電阻和電阻率，設有電位夾具和電流夾具，能保證測量導體電流電阻的準確性。 主要參數：兩電位夾具內側距離：1000±1mm

Configuration: LX-9853 Applicable scope of universal conductor resistance fixture: The fixture is matched with the conductor resistivity tester or the double arm DC bridge. used for detecting conductor resistance and resistivity. and equipped with potential clamp and current clamp. to ensure the accuracy of measuring conductor current resistance. Main parameters: two potential fixture inside distance: 1000±1mm

2）電位夾具刀口平直，寬度：2mm    3）重量：10KG4）外形尺寸：1300125X16mm    5）最大測試試樣截面積約：300㎡  5）最大測試試樣截面積約：300㎡

Potential clamp flat blade. width：2mm3）weight：10KG4）overall dimensions：1300125X16mm    5）Maximum cross-sectional of test specimen about：300㎡  5）Maximum cross-sectional of test specimen about：300㎡

配套方案：解決各材料狀態 --固態、液態、氣態、顆粒狀 電阻、電阻率、電導率測量

ROOKO瑞柯品牌-------專注于新材料測量與分析儀器解決方案