杜邦PA6 ZYTEL 73G30L 產品特性：含30%玻纖增強，自潤滑，高光澤，良好的剛性，良好的強度，良好的表面光潔度，用于家電部件，體育用品，高光閃點等應用

我公司提供的產品均為正牌塑膠原料，品質保證，貨源穩定，送貨上門，可免費提供官方物性表、UL黃卡，并隨貨提供RoHS報告、SGS報告等，索取權威資料請致電13268582149

PA6 73G30L 物性表：

Physical	Dry	Conditioned	Unit	Test Method
Density	1.36	--	g/cm³	ISO 1183
Molding Shrinkage - Flow				Internal Method
1.60 mm	0.20	--	%
3.20 mm	0.20	--	%
Molding Shrinkage - Across Flow				Internal Method
1.60 mm	1.0	--	%
3.20 mm	1.0	--	%
Molding Shrinkage				ISO 294-4
Across Flow: 2.00 mm	0.60	--	%
Flow: 2.00 mm	0.20	--	%
Water Absorption (Saturation, 23°C)	6.3	--	%	ISO 62
Water Absorption (Equilibrium, 23°C, 50% RH)	1.9	--	%	ISO 62
Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus (23°C)	9800	6000	MPa	ISO 527-2
Tensile Strength (23°C)	178	117	MPa	ASTM D638
Tensile Stress (Break, 23°C)	185	115	MPa	ISO 527-2
Tensile Elongation (Break, 23°C)	3.5	6.0	%	ASTM D638
Tensile Strain (Break, 23°C)	3.5	6.0	%	ISO 527-2
Tensile Creep Modulus (1 hr)	--	5500	MPa	ISO 899-1
Tensile Creep Modulus (1000 hr)	--	4400	MPa	ISO 899-1
Flexural Modulus (23°C)	8820	4480	MPa	ASTM D790
Flexural Modulus (23°C)	8200	--	MPa	ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength				ISO 179/1eA
-40°C	11	--	kJ/m²
-30°C	11	21	kJ/m²
23°C	16	23	kJ/m²
Charpy Unnotched Impact Strength				ISO 179/1eU
-30°C	80	84	kJ/m²
23°C	100	97	kJ/m²
Notched Izod Impact (23°C)	130	210	J/m	ASTM D256
Notched Izod Impact Strength				ISO 180/1A
-40°C	11	--	kJ/m²
-30°C	11	11	kJ/m²
23°C	15	20	kJ/m²
Unnotched Izod Impact (23°C)	1100	1300	J/m	ASTM D4812
Unnotched Izod Impact Strength				ISO 180/1U
-30°C	90	--	kJ/m²
23°C	100	--	kJ/m²
Thermal	Dry	Conditioned	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed)	220	--	°C	ASTM D648
Heat Deflection Temperature (0.45 MPa, Unannealed)	220	--	°C	ISO 75-2/B